Service
Recommended Products /
发布时间: 2017 - 10 - 10
Working Principle:The water evaporation Need to absorb heat . According to this principle, when the water under the action of gravity by wet curtain flowing downwards, the upside in the corrugated fiber surface will form a water film; When wet curtain air flowing through the water in the water film can absorb heat from the air after the evaporation, to take away a lot of latent heat, reduce after wet curtain of air temperature, cooling and humidifying cooling purposes.Manufacturing:Materials: paper material is original of JIAMUSI (north of China). It's pure and fresh. Paper is stronger,less crush and better saturation,etc Glue: what we used is less Benzene and less aldehyde, that is why our cooling pad no odor, and environment friendly. and we are planing to do completely without benz...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) Even non-professionals can disassemble and clean cooling pads easily.6) Integrated water distribution system--reduce water block risk7) 1-99 hours auto clean can be made to extend cooler's life8) Water lack protection allows long pump lifeCharacteristics:1. Reasonable design with strong structure2. Slant water tank with drain valve in lowest place, while drainage, water-flow can wash tank3. Integrated water distributor with only one built-in pipe -no risk for water leakage4. With air damper to avoid hot air outlet in winter5. Easy i...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃  2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) The frame for cooling pads could be dissembled easily for maintenance6) Integrated water distributor system--reduce water block risk7) Auto clean function can be made to extend cooler’s life, and less maintenance is needed8) Water lack protection allows long pump life Characteristics:1.Equipped with brushless DC motor, the cooler runs smoothly with low noise. 2.Motor with light-weight, less noise, no excitation sound. 3.Operate on both 50HZ/60HZ. 4.The running voltage is among 200-264V. 5.Motor with h...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) Even non-professionals can disassemble and clean cooling pads easily.6) 1-99 hours auto clean can be made to extend cooler’s life7) Water lack protection allows long pump lifeCharacteristics:1. Different fan speeds for choice: 1-phase variable-speed, 3-phase 1-spped or 2-speed2. Different air discharges (top, down or side) meet different installation requirements3. Using LCD or standard controller, easy to operate4. Materials for casing are anti-UV, anti-corrosion, anti-aging, and no deformation5. Fan impeller is special designed to...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) Even non-professionals can disassemble and clean cooling pads easily.6) 1-99 hours auto clean can be made to extend cooler’s life7) Water lack protection allows long pump lifeCharacteristics:1. Different fan speeds for choice and different air discharges (top, down or side) meet different installation requirements2. Using standard controller, easy to operate3. Materials for casing are anti-UV, anti-corrosion, anti-aging, and no deformation4. Fan impeller is special designed to allow large airflow but lower noise5. Motor applied is m...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) 1-99 hours auto clean can be made to extend cooler's life6) Water lack protection allows long pump lifeCharacteristics:1. Different fan speeds: inverter frequency control variable speed; 3-phase,2-speed 2. different air discharges (top, down or side) meet different installation requirements3. Using standard controller, easy to operate4. Materials for casing are anti-UV, anti-corrosion, anti-aging, and no deformation5. Fan impeller is special designed to allow large airflow but lower noise6. Motor applied is moistureproof, water...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) The cooling pad frame could be disassembled easily for clean and maintenance.6) 1-99 hours auto clean can be made to extend cooler’s life7) Different models from small airflow to large airflow meet different requirements in different applications.Characteristics:1. Using unitary tank, compact structure with high strength.2. Using double inlet forward centrifugal fan with large airflow, big air pressure and long drive distance.3. The fan volute is made of plastic one-step injection molding with high efficiency, low noise, light weigh...
Service Maintenance

Evaporative air cooler is a kind of energy-saving equipment and it only needs some maintenance. But as the machine is installed outside, to have a better cooling effect, it"s better for you to do some cleaning after a long time using.
 
Main maintenance
 
 ●Clean water tank
 
 ●Clean valve by tap water; if there is too much dust in the valve, you can take it out and then clean it by tap water.
 
 ●Clean cooling pad
 
Remove the pad from the cooler, and then clean it by tap water.
 
When in winter or you don’t use the coolers for a while, please do the following:
 
First, close the water valve and remove the cooling pad to have a complete cleaning as shown above, at the same time, empty the tank and clean it. If permits, it’s better to have a disfection. After cleaning, install the cooling pad and make the cooler working 5 to 8 minutes to dry the pad, and at last shut down the power supply. It will be better to hood protective cover to stop the dust outside.
 
●Remove the smell
 
If you don’t clean the cooler or do some maintenance after using some time, the air cooled may have some smell and you should clean the cooler and tank as Item 2.
 
Notes
 
1. It is necessary to cut down the power supply and put a sign saying maintenance and no use on the controller switch in order to prevent
2. Please be careful to remove the cooling pad and the water pressure cannot be too high in order to protect the pad. Do not add any corrosive chemicals to the pad.
3. Fasten safety bell when working at height for service people.

 
Add:No.12, Guanzhou Road, Gaishan Town, Cangshan District, Fuzhou, Fujian, China
Tel:+86 591 8825 1569
Fax:+86 591 8760 7272
邮编:330520
Copyright 2017-2022 AOLAN. All Rights Reserved. Aolan (Fujian) Industry Co.,Ltd. 闽ICP备06022473号-1
犀牛云提供云计算服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 0591 - 88251569
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开