Products  
Recommended Products /  
发布时间: 2017 - 10 - 10
Working Principle:The water evaporation Need to absorb heat . According to this principle, when the water under the action of gravity by wet curtain flowing downwards, the upside in the corrugated fiber surface will form a water film; When wet curtain air flowing through the water in the water film can absorb heat from the air after the evaporation, to take away a lot of latent heat, reduce after wet curtain of air temperature, cooling and humidifying cooling purposes.Manufacturing:Materials: paper material is original of JIAMUSI (north of China). It's pure and fresh. Paper is stronger,less crush and better saturation,etc Glue: what we used is less Benzene and less aldehyde, that is why our cooling pad no odor, and environment friendly. and we are planing to do completely without benz...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) Even non-professionals can disassemble and clean cooling pads easily.6) Integrated water distribution system--reduce water block risk7) 1-99 hours auto clean can be made to extend cooler's life8) Water lack protection allows long pump lifeCharacteristics:1. Reasonable design with strong structure2. Slant water tank with drain valve in lowest place, while drainage, water-flow can wash tank3. Integrated water distributor with only one built-in pipe -no risk for water leakage4. With air damper to avoid hot air outlet in winter5. Easy i...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃  2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) The frame for cooling pads could be dissembled easily for maintenance6) Integrated water distributor system--reduce water block risk7) Auto clean function can be made to extend cooler’s life, and less maintenance is needed8) Water lack protection allows long pump life Characteristics:1.Equipped with brushless DC motor, the cooler runs smoothly with low noise. 2.Motor with light-weight, less noise, no excitation sound. 3.Operate on both 50HZ/60HZ. 4.The running voltage is among 200-264V. 5.Motor with h...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) Even non-professionals can disassemble and clean cooling pads easily.6) 1-99 hours auto clean can be made to extend cooler’s life7) Water lack protection allows long pump lifeCharacteristics:1. Different fan speeds for choice: 1-phase variable-speed, 3-phase 1-spped or 2-speed2. Different air discharges (top, down or side) meet different installation requirements3. Using LCD or standard controller, easy to operate4. Materials for casing are anti-UV, anti-corrosion, anti-aging, and no deformation5. Fan impeller is special designed to...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) Even non-professionals can disassemble and clean cooling pads easily.6) 1-99 hours auto clean can be made to extend cooler’s life7) Water lack protection allows long pump lifeCharacteristics:1. Different fan speeds for choice and different air discharges (top, down or side) meet different installation requirements2. Using standard controller, easy to operate3. Materials for casing are anti-UV, anti-corrosion, anti-aging, and no deformation4. Fan impeller is special designed to allow large airflow but lower noise5. Motor applied is m...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) 1-99 hours auto clean can be made to extend cooler's life6) Water lack protection allows long pump lifeCharacteristics:1. Different fan speeds: inverter frequency control variable speed; 3-phase,2-speed 2. different air discharges (top, down or side) meet different installation requirements3. Using standard controller, easy to operate4. Materials for casing are anti-UV, anti-corrosion, anti-aging, and no deformation5. Fan impeller is special designed to allow large airflow but lower noise6. Motor applied is moistureproof, water...
发布时间: 2017 - 09 - 28
Advantages:1) In different climates, the supply air difference is 5-15℃2) Efficiency for cooling pads used is 90%3) Motor applied is moistureproof, waterproof with tiny temperature rise4) Fan impeller is special designed to allow large airflow but lower noise5) The cooling pad frame could be disassembled easily for clean and maintenance.6) 1-99 hours auto clean can be made to extend cooler’s life7) Different models from small airflow to large airflow meet different requirements in different applications.Characteristics:1. Using unitary tank, compact structure with high strength.2. Using double inlet forward centrifugal fan with large airflow, big air pressure and long drive distance.3. The fan volute is made of plastic one-step injection molding with high efficiency, low noise, light weigh...

Heat Recovery Type Fresh Air Unit

Product features:

1.Fashionable and attractive structure, easy installation and maintenance.

2.International quality, stable running

1)The running components we adopt, including cooling parts, controlling components, pump, fan, etc, are coming from international famous brands, thus the quality is ensured.

2)Intelligent control, human-computer interface and standard communication protocol with high accuracy

3)Equipped with complete protective device, stable running.

3.Professional design for anti-corrosion and rust-proof ensures long working life

1)Heat ex-changer is made of pure titanium pipe, never rust;

2)The unit is closed to avoid assault from mouse, insects, etc.

3)The water tank is injection moulding by PP, and the pipe system is PRR seamless welded and the liquid will never leak

4.With dehumidification regeneration balancer, there is no need to fill water outside to avoid the water softened.


适用范围:
上市时间: 2018 - 01 - 02
产品描述:
产品说明:
Applicable condition:◆ Indoor exhaust air available, and exhaust air vol.≥80%:◆ Applicable ambient temp.:-5℃~40℃Application area:It can be widely applied in air conditioning system which allows heat recovery (indoor exhaust air can be used, and exhaust air rate≥70% supply air rate), such as fresh air treatment for office, R&D building, transportation hubs, exhibition center, hotels, apartment, hospital, and factories, etc; especially suitable for independent temperature and humidity control air conditioning system combined with other dry-type end equipment.Product features:1.Fashionable and attractive structure, easy installation and maintenance.2.International quality, stable running1)The running components we adopt, including cooling parts, controlling components, pump, fan, etc...
  • Particulars
  • Particulars
  • 安装视频
  • 成功案例
  • 相关产品

Applicable condition:

◆ Indoor exhaust air available, and exhaust air vol.≥80%:

◆ Applicable ambient temp.:-5℃~40℃

Application area:

It can be widely applied in air conditioning system which allows heat recovery (indoor exhaust air can be used, and exhaust air rate≥70% supply air rate), such as fresh air treatment for office, R&D building, transportation hubs, exhibition center, hotels, apartment, hospital, and factories, etc; especially suitable for independent temperature and humidity control air conditioning system combined with other dry-type end equipment.

Product features:

1.Fashionable and attractive structure, easy installation and maintenance.

2.International quality, stable running

1)The running components we adopt, including cooling parts, controlling components, pump, fan, etc, are coming from international famous brands, thus the quality is ensured.

2)Intelligent control, human-computer interface and standard communication protocol with high accuracy

3)Equipped with complete protective device, stable running.

3.Professional design for anti-corrosion and rust-proof ensures long working life

1)Heat ex-changer is made of pure titanium pipe, never rust;

2)The unit is closed to avoid assault from mouse, insects, etc.

3)The water tank is injection moulding by PP, and the pipe system is PRR seamless welded and the liquid will never leak

4.With dehumidification regeneration balancer, there is no need to fill water outside to avoid the water softened.


Working Principle:

heat recovery type fresh air unit

Model Definition:

heat recovery type fresh air unit

Specification

heat recovery type fresh air unit

heat recovery type fresh air unit

Dimension

1.AHLD-TD(V)F 02,03,04,05,06,08,10,12
heat recovery type fresh air unit

2.AHLD-TD(V)F 15,20

heat recovery type fresh air unit

heat recovery type fresh air unit

Installation Foundation Diagram

1.Installation foundation diagram

heat recovery type fresh air unit

2.Duct installation diagram

Heat Recovery Type Fresh Air Unit


Model Selection Notes

When place order, model, function, specification should be offered.

Indicate the installation type and position (indoor or outdoor)

For any special requirement or technical problem, please contact us.

发布时间: 2017 - 09 - 29
Applicable condition:◆ Indoor exhaust air available, and exhaust air vol.≥80%:◆ Applicable ambient temp.:-5℃~40℃Application area:It can be widely applied in air conditioning system which allows heat recovery (indoor exhaust air can be used, and exhaust air rate≥70% supply air rate), such as fresh air treatment for office, R&D building, transportation hubs, exhibition center, hotels, apartment, hospital, and factories, etc; especially suitable for independent temperature and humidity control air conditioning system combined with other dry-type end equipment.Product features:1.Fashionable and attractive structure, easy installation and maintenance.2.International quality, stable running1)The running components we adopt, including cooling parts, controlling components, pump, fan, etc...
 
Add:No.12, Guanzhou Road, Gaishan Town, Cangshan District, Fuzhou, Fujian, China
Tel:+86 591 8825 1569
Fax:+86 591 8760 7272
邮编:330520
Copyright 2017-2022 AOLAN. All Rights Reserved. Aolan (Fujian) Industry Co.,Ltd. 闽ICP备06022473号-1
犀牛云提供云计算服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 0591 - 88251569
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开